STAR ARMY

Sci-fi roleplaying and worldbuilding community

User Tools

Site Tools


stararmy:buildings:crdm:ke-p1-16a_water_treatment

Ke-P1-16a - Water Treatment

This Collapsible Rapid Deployment Module has all the standard features. It was developed for the Star Army of Yamatai as part of the Type 33 Prefab Outpost Modules. It became available in YE 33.

Ke-P1-16a Water Treatement

About the Ke-P1-16

The Ke-P1-16 provides a large scale water treatment facility for use by soldiers in the Outpost. The refresher is removed from the CRDM.

Details

Organization Using This item: Star Army of Yamatai Type: Water Treatment Nomenclature: Ke-P1-16 Designers: Ketsurui Zaibatsu Research and Development teams, Star Army of Yamatai Manufacturers: Ketsurui Fleet Yards Entered service: YE 33

Water System

The Ke-P1-16 has five tanks for storing drinkable water. It has one tank for untreated water, this can be water transferred from other CRDM, or pumped into the tank from a local water supply.

  • Each tanks holds 12,566 liters (3,319 gallons), total capacity 62,830 liters (16,595 gallons)
  • Purification capacity: 2,000 liters an hour

Filtration

All water is passed through a series of filters to remove any solid matter from waste water. The removed matter is then transferred to a drier which heats it and removed all moisture. The dried matter is then put into a hemosynth processor which brakes it down into its basic elements and produces blocks that can be used in a Ke-P1-06a - Workshop.

Purification

The filtered water is then run through a pressure tank where it is heated to above boiling, the water then passes into a cooling tank and then through an osmosis system to purify the water and produce potable water. The purified water is then stored in reservoirs until it is needed.

Internal view


Quality:
stararmy/buildings/crdm/ke-p1-16a_water_treatment.txt · Last modified: 2023/12/21 04:26 by 127.0.0.1