Designer: Lorath Matriarchy Occhesta House.
During day-to-day activities, or even in the line of military duty, accidents which cause various ranges of injury are known to happen. It is essential that injured persons receive first aid as soon as possible; to facilitate this, the Lorath Occhesta House has gone about production of several types of first aid kits, intended to be circulated to both military and civilian individuals and facilities.
The “Pocket Size” First Aid Kit is a kit which has been put together inside of a container which measures approximately at a four inch length, three inch width and one inch depth. These containers can be made from hard plastic, soft plastic in a pouch format, stone thread cloth, or low grade metal.
Included in these kits are the following:
The “Portable” First Aid Kit is a step above the “Pocket Size First Aid Kit” in regards to the size of the container, and the equipment stored inside. This kit measures as an eight inch by eight inch square, with a two inch depth. The containers can be made from the same materials as the “Pocket Size” First Aid Kit.
Included in these kits are the following:
The “Emergency Response Kit” is a portable first aid kit which is intended to be issued to medical personnel ranging from civilian first response crews, to front line combat medics. The “Emergency Response Kit” is a 22 Inch by 8 inch stone thread satchel with an eight inch depth.
These cabinets are often installed inside of government, commercial, industrial, and military facilities. They can also be found inside of larger vehicles and space craft. These high quality metal constructed plastic coated stone thread reinforced cabinets contain a wide assortment of first response equipment.
The minimal complement of the First Aid Cabinet is identical to the “Emergency Response Kit”, save for a few select changes which would be essential for large scale emergencies.
Standard Emergency Monitor and Communication Device: The Emergency Monitor and Communication Device is intended to be used as a monitoring device for a patient’s life signs, the device also includes a short and long range radio receiver and transmitter, along with a flashlight and Geiger counter.
Built into the device is a pulse, blood pressure, and blood oxygen sensor pad (A 1×1 metallic square) which operates by simply being pressed against the patient’s skin. It can be activated by using the hand grip of the device, or it can be removed and pressed against a patient’s skin. The sensor pad is powered by neural electrical impulses, and remains in communication with the main device through a small radio transmission chip. The primary device will display the gathered data upon its hard plastic protected LED monitor.
The standard device is six inches by two inches with a one and a half inch depth, available in orange, red, and black. The device is constructed from a hard plastic with stone thread mesh reinforcement, and is powered by a small size bacteria charge pack, and can also be powered by solar power, or lithium cell.
Advanced Emergency Monitor and Communication Device: The advanced version of the Emergency Monitor and Communication Device incorporates the standard features of the device, and through the use of an expansion port, adds on a new range of functionality.
The “advanced” device includes a chemical analysis device which conducts a gas spectral analysis of a compound placed into a small receptacle which is designed to accept a sample containment vial (Three included in the package). The “advanced” device also includes a cell and DNA scanner which is capable of detecting abnormalities in Lorath and Helashio genetic and physical material, it operates the same as the chemical analysis device. Both of these expansions to the original device are 3 inch by 4 inch hard plastic coated devices with proper interface ports and insertion ports.
This article was created by DocTomoe. It was approved by Wes on December 27, 2006: Approval Thread
http://www.z-medica.com/quikclot/hemostatic_quikclot.asp http://www.cpr-savers.com/Industrials/ban1.html Nano-machine device availability is based off: http://stararmy.com/forums/viewtopic.php?t=2189 http://stararmy.com/forums/viewtopic.php?p=16200#16200 http://stararmy.com/forums/viewtopic.php?t=4208 Incase of questions about the copper plate tweezers: http://www.copper.org/health/homepage.html