The refining module is an addition to the Yimeya class miner to give the ship the ability to refine harvested minerals. It was first manufactured in YE 33

Class: Module Nomenclature: Ni-Y1-M3301 Type: Refining Designers: Nayacesen Industrials Manufacturer: Geshrinari Shipyards Price: 5,000 KS

Length: 30 meters Width: 25 meters Height: 12 meters Decks: 2 (4 meter)

The module has a small cargohold to temporarily hold refined minerals before they are transfered to either the ships main cargohold or to an adjacent cargo module.

This bay features all of the modules refining equipment.

A series of interconnected pipes that are used to transfer minerals from the module to the ship or another cargo module.

The module is equipped with a reinforced armored hull that serves both to protect the module from outside assault but also to protect the insides in the event of a catastrophic systems failure. The module is equipped with point three inches of durandium plating. The framework of the module is Durandium Alloy.

Uses a station that ties into a standard Ge-Y1-E3103 - Intercom System

A series of four connection 'clamps' help to marry the module to the Yimeya, these clamps are made out of Durandium Alloy, with four additional clamps located on the side of the ship that merry into four points on the side of the module.

An advanced refining system that allows smelted minerals to also be turned into materials used for construction and also for easy storage. Most minerals are smelted down into blocks that can be easily stored and then remelted at a later date to be turend into other useful materals. Or, the refinary could smelt the materials into, as stated, construction items like bars or plates.

Uses a Geshrinari Fusion Generator, which can operate for a good four hours with the fuel onboard the module.

Tanks used to provide fuel to the modules fusion reactor. There is a connection line so that the tank can be attached to the main ship.