Sidebar
corp:yugumo_corporation:motoyoshi_fleet_yards:systems:shouri_armor
Table of Contents
Shouri Multi-layer Hull & Frame Constructs
Shouri Multi-Layer Hull and Frame Constructs were developed by Motoyoshi Fleet Yards in YE 30.
| Shouri Multi-Layer Hull and Frame Constructs | |
|---|---|
| Designer | Motoyoshi Fleet Yards |
| Nomenclature | Discontinued Product |
| Manufacturer | Motoyoshi Fleet Yards |
| Fielded by | Motoyoshi Fleet Yards |
| Production | Discontinued Product |
| Price | Negotiated |
Legacy Product Information
Motoyoshi Fleet Yards was acquired by the Yugumo Corporation in YE 41. These systems were deployed in vessels produced prior to that year and have been discontinued. Product Source is currently salvage and stockpiled stock and is no longer being produced. Please contact the Yugumo Corporation for more information.
Introduction
In YE 30, Motoyoshi Fleet Yards was slowly being phased in as primary military contract service for the Fifth Expeditionary Fleet. The Shouri Armor project was created to design, manufacture, and produce a layered armor and frame system capable of being deployed on newer starship classes.
For the most part, the Shouri utilized existing technologies but combines them in combinations that suit the role of the starship construct it is being included in.
Later that year, Motoyoshi Fleet Yards switched to the United Outer Colonies. The use of these constructs was used then in the construction of United Outer Colonies Peacekeeping Forces with the omission of any materials that were considered restricted technologies by the Star Army of Yamatai
Type 1:Power Armor Constructs
Power Armor Class Constructs.
Shouri PA Armor Series Type 1A Construct
The Type 1A construct is for 'light' armors. The design is ideal for armors playing an interceptor or light infantry role.
| Type 1A Construct Assembly | |
|---|---|
| Frame | Titanium Boron Carbide Micro-frame |
| Inner Shell | Durandium Alloy Tri-layer Mesh Shell |
| Outer Plates | Thin Durandium Alloy Interlocking Scale |
| Overall Construct Rating | SP 3 |
| Notes: | Max Speed +0.05c |
| Optional | |
|---|---|
| Stealth | 0.1cm Xiulurium coating |
Shouri PA Armor Series Type 1B Construct
The Type 1B is the “middle of the road” construct for power armors. It is a balance between weight and strength.
| Type 1B Construct Assembly | |
|---|---|
| Frame | Titanium Boron Carbide Micro-frame |
| Inner Shell | Durandium Alloy Tri-layer Mesh Shell |
| Outer Plates | Durandium Alloy Plate |
| Overall Construct Rating | SP 6 |
| Notes: | Max Speed +0.05c |
| Optional | ||
|---|---|---|
| Stealth | 0.1cm Xiulurium coating | |
| Ablative Suspension Stage | Held in forcefields just off the surface of the armor are small crystalline ablative “puzzle-like” pieces that are designed to break apart dissipating the energy of incoming attacks by breaking apart. | -1 ADR from incoming attacks (DR+1) |
Shouri PA Armor Series Type 1C Construct
The Type 1C is the heaviest power armor construct for power armors produced by MFY.
| Type 1C Construct Assembly | |
|---|---|
| Frame | Titanium Boron Carbide Micro-frame |
| Inner Shell | Durandium Alloy Tri-layer Mesh Shell |
| Outer Plates | Thin Yamataium Plate |
| Overall Construct Rating | SP 12 |
| Notes: | Max Speed +0.025c |
| Optional | ||
|---|---|---|
| Stealth | 0.1cm Xiulurium coating | |
| Ablative Suspension Stage | Held in forcefields just off the surface of the armor are small crystalline ablative “puzzle-like” pieces that are designed to break apart dissipating the energy of incoming attacks by breaking apart. | DR+1 |
Type 2:Fighters/Shuttles/Small Craft
Shouri FSS Armor Series Type 2A Construct
For lighter shuttle, fighter, and small craft designs.
| Type 2A Construct Assembly | |
|---|---|
| Frame | Durandium Alloy Truss and Titanium Boron Carbide rod frame |
| Lining | Yarvex Lining |
| Outer Layer | Carbon-Ring |
| Overall Construct Rating | SP 12 |
| Notes: | Max Speed +0.05c |
| Optional | ||
|---|---|---|
| Stealth | 0.1cm Xiulurium coating | |
| Ablative Suspension Stage | Held in forcefields just off the surface of the armor are small crystalline ablative “puzzle-like” pieces that are designed to break apart dissipating the energy of incoming attacks by breaking apart. | DR+1 |
Shouri FSS Armor Series Type 2B Construct
Heavy construct generally for heavy fighters and bombers.
| Type 2B Construct Assembly | |
|---|---|
| Frame | Durandium Alloy Truss and Rod frame |
| Lining | Yarvex Lining |
| Outer Layer | 0.2m Yamataium Plate |
| Overall Construct Rating | SP 25 |
| Optional | ||
|---|---|---|
| Stealth | 0.1cm Xiulurium coating | |
| Ablative Suspension Stage | Held in forcefields just off the surface of the armor are small crystalline ablative “puzzle-like” pieces that are designed to break apart dissipating the energy of incoming attacks by breaking apart. | DR+1 |
Type 3:Escorts (Gunboats, Corvettes, Frigates, Destroyers, Gunships)
Shouri ES Armor Series Type 3A Construct
For smaller lighter escort ships.
| Type 3A Construct Assembly | |
|---|---|
| Primary SpaceFrame | Durandium Alloy Major Truss |
| Secondary SpaceFrame | Titanium Boron Carbide Truss |
| Lining | Yarvex Lining |
| Outer Layer | Durandium Alloy Plate |
| Overall Construct Rating | SP 6 |
| Notes: | Max Speed +0.05c |
| Optional | ||
|---|---|---|
| Stealth | 0.1cm Xiulurium coating | |
| Ablative Suspension Stage | Held in forcefields just off the surface of the armor are small crystalline ablative “puzzle-like” pieces that are designed to break apart dissipating the energy of incoming attacks by breaking apart. | DR+1 |
Shouri ES Armor Series Type 3B Construct
For moderately armored escort ships.
| Type 3b Construct Assembly | |
|---|---|
| Primary SpaceFrame | Forcefield Reinforced Durandium Alloy Major Truss |
| Secondary SpaceFrame | Durandium Alloy Secondary Truss and Rod Assembly |
| Lining | Yarvex Lining |
| Outer Layer | Durandium Alloy Interlocking Plate |
| Overall Construct Rating | SP 6 |
| Notes: | Max Speed +0.05c |
| Optional | ||
|---|---|---|
| Stealth | 0.1cm Xiulurium coating | |
| Ablative Suspension Stage | Held in forcefields just off the surface of the armor are small crystalline ablative “puzzle-like” pieces that are designed to break apart dissipating the energy of incoming attacks by breaking apart. | DR+1 |
Shouri ES Armor Series Type 3C Construct
For heavily armored escort ships. Generally Heavy Gunships.
| Type 3C Construct Assembly | |
|---|---|
| Primary SpaceFrame | Forcefield Reinforced Durandium Alloy Major Truss |
| Secondary SpaceFrame | Durandium Alloy Secondary Truss and Rod Assembly |
| Lining | Yarvex Lining |
| Outer Layer | Thick Yamataium Plate |
| Overall Construct Rating | SP 30 |
| Optional | ||
|---|---|---|
| Stealth | 0.1cm Xiulurium coating | DR 1 |
| Ablative Suspension Stage | Held in forcefields just off the surface of the armor are small crystalline ablative “puzzle-like” pieces that are designed to break apart dissipating the energy of incoming attacks by breaking apart. | DR+1 |
Type 4: Cruisers, Battlecruisers, Carriers
Shouri CS Armor Series Type 4A Construct
Smaller lighter carriers, cruisers are best suited for this construct.
| Type 3D Construct Assembly | ||
|---|---|---|
| Primary SpaceFrame | Yamataium Major Truss | |
| Secondary SpaceFrame | Yamataium Secondary Truss and Rod Assembly | |
| Overall SpaceFrame | Moderate | |
| Lining | Yarvex with fullerite reinforcers | |
| Outer Layer | Thin Yamataium Plate | |
| Ablative Suspension Stage | Held in forcefields just off the surface of the outer layer are small crystalline ablative “puzzle-like” pieces that are designed to break apart dissipating the energy of incoming attacks. | DR+1 |
| Overall Construct Rating | SP 30 | |
| Optional | |
|---|---|
| Stealth | 0.4cm Xiulurium coating |
Shouri CS Armor Series Type 4B Construct
For most carriers and cruisers.
| Type 4B Construct Assembly | |
|---|---|
| Primary SpaceFrame | Forcefield Reinforced Yamataium Major Truss |
| Secondary SpaceFrame | Yamataium Secondary Truss and Rod Assembly |
| Lining | Yarvex with fullerite reinforcers |
| Outer Layer | Zanarium coated Thick Yamataium Plate |
| Ablative Suspension Stage | Held in forcefields just off the surface of the outer layer are small crystalline ablative “puzzle-like” pieces that are designed to break apart dissipating the energy of incoming attacks. |
| Overall Construct Rating | SP 40 |
Type 5: Battleships, Bases
Shouri BSB Armor Series Type 5A Construct
For Battleships and small bases.
| Type 4C Construct Assembly | |
|---|---|
| Primary SpaceFrame | Forcefield Reinforced Yamataium Major Truss |
| Secondary SpaceFrame | Yamataium Secondary Truss and Rod Assembly |
| Overall SpaceFrame | Moderate |
| Lining | Yarvex with fullerite reinforcers |
| Inner Layer | Thin Yamataium mesh |
| Outer Layer | Zanarium coated Thick Yamataium Plate |
| Ablative Suspension Stage | Held in forcefields just off the surface of the outer layer are small crystalline ablative “puzzle-like” pieces that are designed to break apart dissipating the energy of incoming attacks. |
| Overall Construct Rating | SP 50 for Battleships, SP 100 for small bases |
Shouri BSB Armor Series Type 5B Construct
Super-Battleships and Large Bases.
| Type 4C Construct Assembly | |
|---|---|
| Primary SpaceFrame | Forcefield Reinforced Yamataium Major Truss |
| Secondary SpaceFrame | Yamataium Secondary Truss and Rod Assembly |
| Lining | Yarvex with fullerite reinforcers |
| Shell | Fullerenes suspended in a forcefield between two layers of Zanarium coated 3.0m thick Yamataium Plate. The Fullerene layer consists mostly of forcefield with fullerenes suspended within it, the fullerenes can be shifted by manipulation of the field to mass at the site of impact, since the layer is mostly composed of forcefields it is highly resilient against antimatter attacks. |
| Ablative Suspension Stage | Held in forcefields just off the surface of the outer layer are small crystalline ablative “puzzle-like” pieces that are designed to break apart dissipating the energy of incoming attacks. |
| Overall Construct Rating | SP 50 for Battleships, SP 200 for Large Bases |
OOC Notes
Quality:
corp/yugumo_corporation/motoyoshi_fleet_yards/systems/shouri_armor.txt · Last modified: 2023/12/21 05:24 by 127.0.0.1