STAR ARMY

Sci-fi roleplaying and worldbuilding community

User Tools

Site Tools


corp:kage:project_thought:aether-heated_jet_engine

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
corp:kage:project_thought:aether-heated_jet_engine [2020/02/08 16:08] – ↷ Links adapted because of a move operation corp:kage:project_thought:aether-heated_jet_engine [2023/12/21 04:21] (current) – external edit 127.0.0.1
Line 5: Line 5:
 Two [[light_point_defense_turret|Light Point Defense Turrets]] are also shown.// Two [[light_point_defense_turret|Light Point Defense Turrets]] are also shown.//
  
-Developed in [[timeline:ye_32]] by [[project_thought_plan]] with [[:character:kage_yaichiro]]'s design and input, the Aether-heated Jet Engine is a cheap and easy to produce atmospheric propulsion system with limitless fuel.  It is intended not only for use in atmospheric and submersible craft, but as an alternate operation mode for future [[technology:turbo_aether_plasma]] Drives which would allow use in atmosphere or even underwater.  It can be used in conjunction with a [[stararmy:systems:combined_field_system]] as well as with [[frictionless_hybrid_joint|Project THOUGHT Frictionless Hybrid Joints]] or [[simplified_joint|Project THOUGHT Simplified Joints]] for thrust vectoring, and can take many physical forms.+Developed in [[timeline:ye_32]] by [[project_thought_plan]] with [[characters:yamatai:kage_yaichiro]]'s design and input, the Aether-heated Jet Engine is a cheap and easy to produce atmospheric propulsion system with limitless fuel.  It is intended not only for use in atmospheric and submersible craft, but as an alternate operation mode for future [[stararmy:systems:turbo_aether_plasma_drive]] Drives which would allow use in atmosphere or even underwater.  It can be used in conjunction with a [[stararmy:systems:combined_field_system]] as well as with [[frictionless_hybrid_joint|Project THOUGHT Frictionless Hybrid Joints]] or [[simplified_joint|Project THOUGHT Simplified Joints]] for thrust vectoring, and can take many physical forms.
  
 ===== History ===== ===== History =====
  
-While developing concepts for the [[tsubame_fighter_prototype]], it was realized that a very simple jet engine with limitless fuel could be utilized for within a planet's atmosphere or oceans simply by moving heat away from an Aether Generator and using it to expand or combust the medium being traveled in.  Such a simple method may not have had immediate military applications at first glance, but it was realized that combining the technology with existing [[technology:turbo_aether_plasma]] Drive technology may make military-grade engines more useful with minimum cost.  With both civilian and military applications abound for the simple and easily modified concept, the simple engines were approved for field testing on the prototype fighter.+While developing concepts for the [[tsubame_fighter_prototype]], it was realized that a very simple jet engine with limitless fuel could be utilized for within a planet's atmosphere or oceans simply by moving heat away from an Aether Generator and using it to expand or combust the medium being traveled in.  Such a simple method may not have had immediate military applications at first glance, but it was realized that combining the technology with existing [[stararmy:systems:turbo_aether_plasma_drive]] Drive technology may make military-grade engines more useful with minimum cost.  With both civilian and military applications abound for the simple and easily modified concept, the simple engines were approved for field testing on the prototype fighter.
  
 ===== Basic Description ===== ===== Basic Description =====
Line 17: Line 17:
 The speed of the intake and the temperature of the heating element that expands the air or water and forces it out the back of the jet is typically adjustable depending on temperature and the density of the medium being traveled through, as well as the desired acceleration.  This is often handled by an on-board computer or a cockpit-controlled computer system if installed on a craft.  Many models are limited by the physical fan intake, and typically have a maximum airspeed in the realm of 3,581 kph/2,225 mph (roughly Mach 3 at sea level) due to this.  Some higher end military variants utilize rotating forcefields to simulate the intake fan.  In these cases the intakes can be deactivated or even modified to tilt inward and aid in compression, and the jets switch over to a form of operation comparable to a Ramjet; attaining an estimated airspeed of 7,163 kph/4,450 mph (roughly Mach 6 at sea level).  Depending on the actual construction of the engine, this can be increased further, but enters the realm of specialized scramjet engines that use more exotic materials than Durandium.  Note that these speeds are considerably slower underwater but still function. The speed of the intake and the temperature of the heating element that expands the air or water and forces it out the back of the jet is typically adjustable depending on temperature and the density of the medium being traveled through, as well as the desired acceleration.  This is often handled by an on-board computer or a cockpit-controlled computer system if installed on a craft.  Many models are limited by the physical fan intake, and typically have a maximum airspeed in the realm of 3,581 kph/2,225 mph (roughly Mach 3 at sea level) due to this.  Some higher end military variants utilize rotating forcefields to simulate the intake fan.  In these cases the intakes can be deactivated or even modified to tilt inward and aid in compression, and the jets switch over to a form of operation comparable to a Ramjet; attaining an estimated airspeed of 7,163 kph/4,450 mph (roughly Mach 6 at sea level).  Depending on the actual construction of the engine, this can be increased further, but enters the realm of specialized scramjet engines that use more exotic materials than Durandium.  Note that these speeds are considerably slower underwater but still function.
  
-Variants that are integrated into spacecraft or are part of [[technology:turbo_aether_plasma]] Drives sometimes have intakes with retractable armor, so as to conceal and provide protection to the drive when the intakes are not in use.+Variants that are integrated into spacecraft or are part of [[stararmy:systems:turbo_aether_plasma_drive]] Drives sometimes have intakes with retractable armor, so as to conceal and provide protection to the drive when the intakes are not in use.
  
 ---- struct data ---- ---- struct data ----
 +products.product_cat : 
 +products.product_name : 
 +products.product_nomenclature : 
 +products.product_designer : 
 +products.product_manufacturer : 
 +products.product_brand : 
 +products.product_release_year : 
 +products.product_discontinued_year : 
 +products.product_usedby : 
 +products.product_parent : 
 +products.product_image : 
 +products.product_price_ks : 
 +products.product_drv3_max : 
 +products.product_production : 
 +products.product_description : 
 +products.product_length : 
 +products.product_width : 
 +products.product_height : 
 +products.product_mass : 
 +stararmy_logistics.saoy_supclass : 
 +stararmy_logistics.saoy_usage : 
 +stararmy_logistics.saoy_adopted_year : 
 +stararmy_logistics.saoy_reviewed_last : 
 +stararmy_logistics.saoy_item_retired_year : 
 +stararmy_logistics.saoy_itemcount : 
 ---- ----
  

corp/kage/project_thought/aether-heated_jet_engine.txt · Last modified: 2023/12/21 04:21 by 127.0.0.1