Table of Contents

Blitzer Hovercar

The Blitzer Hovercar is a simple design using fan technology to produce lift. It has weights to allow forward, reverse, and turning movement. It has a surface clearance of 1 Meter. It was designed and put into mass production in the Second Quarter of AF 260.1)

Appearance

The standard models come in DSW red, but they can be purchased in Blue, Green, Black, or Purple.

blitzer-car.jpg

General Information

Designer: Dietrich Starkwerk Manufacturer: Dietrich Starkwerk Cost: 10,000 Abwehran Credits

Performance and Statistics

Speed: Maximum of 145 KPH Length: 2.75 Meters Capacity: 52) Charge Time: 48 Hours or 1 Abwehran Standard Day Lifetime: 4 Abwehran Standard Years3) with regular maintenance.

It is powered by two Solar-Charged Batteries that are constantly charging while under the sunlight.

Movement Method

This simple design uses a weight system to affect movement. When the driver shifts the gear to reverse and presses the pedal, a weight at the center of the vehicle slides back. When the driver releases the pedal the weight slides back. It is similar for forward movement. To turn, a weight slides to the appropriate side as directed by the wheel that the driver uses. To brake, a forward vent slides open and fires air at the ground in the appropriate angle, and the Brake Fans activate bringing the vehicle to a stop.

2)
Driver, Passenger, rear passenger seats
3)
16 YE