Table of Contents

M3 Assault Weapon System

This is an assault rifle that has replaced the earleir M2 Assault Rfile and is currently being fielded by all SMDIoN forces.

History and Development

In late YE 35, experiments were carried out on the platform with a new rifle round and found to be more effective. As a result, NAM began retrofitting all existing M2V platforms to accept the 6.8x43mm round for use with all branches of the SMDIoN.

However, field testing and combat reports indicated the firearm’s gas operated design tended to produce excess fouling within the gun, leading to reports of unreliability.

The rifle was redesigned from the ground up by the SMDIoN to issue troops a rifle that was exceptionally reliable as well as accurate by taking advantage of newly widespread manufacturing processes.

Keeping the existing 6.8 x 43mm NAM round, NAM took full advantage of the aforementioned manufacturing processes in the fields of hammer forging, advances in polygonal rifling, as well as advancements in the fields of metallurgy to create an extremely reliable rifle while keeping an acceptable degree of accuracy.

Initial factory tests exceeded expectations, and DMR, carbine, and pistol variants have gone into production.

Following active tests by military and law enforcement personnel, the M3 was modified to be rechambered in the new 11.5x43mm "Slugger" round, with the internal parts of new rifles beefed up to withstand the greater stresses of the new heavy round.

Nomenclature Information

35 inch (Rifle Variant) 29 inch (Carbine Variant) 20 inch (Pistol Variant)

26 inch (Rifle, stock closed) 20 inch (Carbine and Pistol)

17 inch (Rifle Variant) 10 inch (Carbine and Pistol Variant)

Appearance

Unlike the previous M2V Assault Rifle, the M3 AWS comes with rotary diopter iron sights and a rail system on top of the receiver and on the sides and bottom of the foregrip. This was a departure from the built in optics of the M2V due to a change in military doctrine that prioritized the usage of iron sights, as well as giving the user the ability to add on other types of optics. The M3 AWS can be fitted with red dot, holographic, prismatic, fixed power optics or variable power optics as the situation dictates it. The M3 AWS is a traditionally configured rifle with the magazine in front of the receiver, as opposed to a bullpup. The decision to stick with a traditional rifle design was to ensure that the already well-trained forces of the SMDIoN would not have to retrain for a new system. It is dark green and black with an folding stock.

Discharge Information

Technical Information

The M3 AWS is constructed of high strength steel stamped into a receiver. This ensures a faster production time as well as the fact that stamped receivers are a bit more reliable and have less chances of having metal fatigue under heavy usage

The M3 AWS comes with a cold hammer forged barrel and polygonal rifling. Advantages of polygonal rifling include:

Providing a better gas seal around the projectile as polygonal bores tend to have a slightly smaller bore area, which translates into more efficient use of the combustion gases trapped behind the bullet, slightly more consistent muzzle velocities and slightly increased accuracy.

Less bullet deformation, resulting in reduced drag on the bullet when traveling through the barrel which helps to increase muzzle velocity.

Reduced buildup of copper or lead within the barrel which results in easier maintenance characteristics.

Less sensitive to stress concentration induced barrel failure.

Prolonged barrel life.

Firing Mechanism: Modified Gas Operated

The firearm uses a newly developed firing method not employed in the past by any SMDIoN firearms.

Upon firing in a two shot burst, the gas tube, piston, and barrel as one piece move rearward along the firearm's longitudinal axis, acting upon the independent bolt carrier group. The rearward motion of the bolt carrier group is used by a mechanism in the firearm to automatically feed a round into the now rearward-moving barrel, reducing the time of the second round feeding into the barrel. The round is then fired as the barrel and piston group are moving rearward. As the group return to the original position, the next round is chambered into the firearm.

This gives the rifle a theoretical rate of fire at 1800 RPM in 2 shot burst mode, and ensures a very accurate 2-shot burst, as the recoil felt by the shooter is felt after the second round has left the barrel.

In fully-automatic fire, the mechanism is disabled and the firearm now relies on normal automatic firing mechanisms to fire at a rate of 600 rounds per minute.

Ammunition Description

Ammunition: 11.5x43mm "Slugger"/Galactic Horizon 11.5x43mm Quake1)

Weapon Mechanisms

Misc.

Field Maintenance Procedure

Wipe and clean after every mission, taking care to scrub the barrel down and all moving parts.

Optional Attachments

Included Parts

Pricing

OOC Notes

This page was originally created on 2013/12/25 22:28 by Koenig808 Submission Thread

Products & Items Database
Product Categoriesweapons: rifles
Product NameM3 Assault Weapon System
Nomenclaturena-w3
ManufacturerNepleslian Arms and Munitions
DR v3 maxTier 3
1)
as of YE 42, typically reserved for special forces