IPG Operator Assault Rifle Model 01

Designer: Don John Manufacturer: NAM Name: IPG M1-V Type: Gas Operated Assault Rifle/Under-barrel Shotgun Role: Assault Rifle/Shotgun Length: 2 ft, 9 inch. Barrel Length: 20 inch. Mass: 9.1 ilbs ROF: 650-800 Rounds/min

Projection/ammo type: 12 Gauge Shells or FMJ Spitzer Rounds

Upon pulling the trigger, firing pin strikes primer, propelling the round out of the shell and through the barrel. Gasses from the exiting round are sent through a gas port above the barrel and serve to cycle the rotating bolt back and forward, to chamber a new round.

Upon pulling the trigger, firing pin strikes primer, propelling numerous pellets out of the shell and through the smoothbore barrel. Recoil-operated action moves the barrel back, ejecting the shell. Barrel moves forward and loads new shell.

Caliber: 7.62 x51mm KZ, 12 Gauge Effective Range 350 Meters (7.62) 1-10Meters (.50) Maximum Range: 600 Meters (7.62) 50 Meters (.50) Muzzle Velocity: 835 m/s (7.62x51mm) 410 m/s (12 Gauge) Muzzle Blast: Bright yellow flash when exiting barrel, Large flash followed by traces of burning powder (12 Gauge) Firing Mode: Single Shot, 2 round burst Recoil:

• Moderate for 12 Gauge
• Moderate for 7.62, Heavy for 2 round bursts.

Visual Description: Conical, copper plated object with black tip. Set in brass casing. Ammo: 20 Per Magazine Damage Description: Fairly standard, places a hole in the target, minus fragmentation, but more stopping power.

Visual Description: Cylindrical object, red body brass bottom.. Ammo: 3 in Magazine. Damage Description: Sprays numerous pellets at close range.

Safety: Rotating lever on both sides, diagonally to the right above trigger. Fire Mode Selector: Same lever as safety. First position is safe. Second is Semi and third is 3 round. Weapon Sight: Reflex sight rear of the weapon. Attatchment Hard Points: Hard points are located on the top of the weapon.

Safety: Front of trigger guard. Fire Mode Selector: None, Semi-Automatic. Weapon Sight: Able to be side-mounted on either side. Attatchment Hard Points: None.

Field Maintenance Procedure: Whipe and clean after every mission, taking care to scrub the barrel down and all moving parts.

Replaceable Parts and Components:

• .50 Hollow-point Conversion Kit
• All extra parts, internal and external are kept at armories.