Sr-plasma-shotgun

The Sr-plasma shotgun was created to give security forces a more harder hitting stun weapon for riot control. While also letting them switch to a more leathal option should the need arise.

• Year Created: 43
• Designer: Yugumo corperation
• Manufacturer: Yugumo corperation
• Name: Sr-plasma shotgun
• Nomenclature: Yu-W8-M1
• Type: Plasma
• Role: Riot control and to combat boarding parties from pirates
• Length: an overall length of 41.5“
• Weight: 8lbs or 3.62 kilos
• Production: Mass Production

the SR-Plasma Shotgun is a delayed fire weapons system with a plasma gel munition housed in a cylindrical removable magazine the ammo lights of said magazine switch from red (full) to orange (half full) yellow (low ammo) to black (no ammo) a switch system is located along the barrel of the weapon to control power of the stun setting and one setting to switch the ammo to a lethal configuration. The end of the berrol would activate with several internal splitter beams to cause the plasma in lethal setting to split causing a cone of fire similar to a shotgun. However, when not in lethal form the plasma shotgun would fire its ammo in gel form as its non-lethal option.

Stun Mode Muzzle Flash: a redish starshaped flash of light

Retort: A sharp crack, buzzing hum as surrounding air is heated and ionized

plasma Appearance: murky white

Effective Range: 920m

Rate of Fire: 1 shot per trigger pull

Recoil: light

Lethal Mode

Muzzle Flash: Small spherical flash of light around emitter the same color as beam

Retort: A loud, crackling bang as shot breaks sound barrier

plasma Appearance: violet-red

Effective Range: 1600m

Rate of Fire: 1 shot per trigger pull

Recoil: light

• Ammunition:sr-plasma_ammo
• Purpose: (Damage Rating here - Tier 2, Heavy Anti-Personnel
• Round Capacity: 6shots

training setting: this setting is to be used in training and demonstration purposes. stun setting: Stun: Setting will incapacitate most humanoid life forms for several minutes and resistant bio forms for at least 30 seconds thermal stun: Thermal Effect: humanoids experience mild epidermal trauma. Structural materials exhibit visible thermal shock. lethal setting: Disruption Effect: Both organic and structural materiel suffer severe molecular damage effects

• Firing Mechanism: every shot of plasma jell is housed within a discarding plastic jacket with a alloy cap. depending on the setting of the weapon determines the level of power when fired with the “Taihō” Scalable Mass Driver
• Loading: Loading the weapon is done by turning on the safety of the weapon and removing the cylindrical magazine. loading a new magazine however requires you to individually load 6 of the plasma gel rounds into the magazine gel side down.
• Mode Selector: there are several setting or mode selectors located on the right and left side of the weapon along the top edges of the foregrip. once selcted by pressing down the button for five seconds the setting will change after wards pumping the shotgun will cycle the next round.
• Firing Modes: manual pump action
• Safety Mechanism: the black bar resembling a carry handle when lefted up to change a magazine will interupt the power flow of the mass driver allowing the weapon to be safely handled to switch out the magazine. the reasoning for such a large safty lever is so that bulky armors arnt hindered when trying to turn the safety on
• Weapon Sight: iron sites
• Attachment Hard Points: n/a

• SR-Plasma shotgun: 800ks

• replacement parts: 400ks

n/a

Put author information and art credits here. 🚧 This article is a work-in-progress. Is it not currently approved.