The Cargo module is an addition to the Yimeya class miner to give the ship increased Cargo capacity. It was first manufactured in YE 33
Class: Module Nomenclature: Ni-Y1-M3303 Type: Cargo Designers: Nayacesen Industrials Manufacturer: Geshrinari Shipyards Price: 3,000 KS
Length: 30 meters Width: 30 meters Height: 16 meters Decks: 1 (8 meter)
Possessing a decent sized cargohold effectively doubles the amount the ship can carry, it has its own transfer system located onboard so that it can be tied into a mining or refinary module so that the minerals can be easily transfered to the cargohold.
Illumination lights dot the inside of the module and there is an overhead walkway to allows personnal to easily traverse the bay. At the same time, there are also lift machines to ferry either cargopods or crates into an organized position.
A series of interconnected pipes that are used to transfer minerals from the module to the ship or another cargo module.
The module is equipped with a reinforced armored hull that serves both to protect the module from outside assault but also to protect the insides in the event of a catastrophic systems failure. The ship is equipped with point three intches of durandium plating. The framework of the module is Durandium Alloy.
Uses a station that ties into a standard Ge-Y1-E3103 - Intercom System
A series of four connection 'clamps' help to merry the module to the Yimeya, these clamps are made out of Durandium Alloy, with four additional clamps located on the side of the ship that merry into four points on the side of the module.